a KY-020 Tilt switch to a Raspberry Pi Pico 2 example
In this article, we connect a KY-020 Tilt switch to a Raspberry Pi Pico 2, any rp2350 type board will be suitable. There are many good ones, I actually used…
a KY-021 Mini Magnetic Reed Switch to a Raspberry Pi Pico 2 tutorial
In this article, we connect a KY-021 Mini Magnetic Reed Switch to a Raspberry Pi Pico 2, any rp2350 type board will be suitable. There are many good ones, I…
A KY-018 Photoresistor or LDR to a Raspberry Pi Pico 2 example
In this article, we connect an KY-018 Photoresistor or LDR to a Raspberry Pi Pico 2, any rp2350 type board will be suitable. There are many good ones, I actually…
A KY-015 Temperature Sensor to a Raspberry Pi Pico 2 example
In this article, we connect a KY-015 Temperature Sensor to a Raspberry Pi Pico 2, any rp2350 type board will be suitable. There are many good ones, I actually used…
A Raspberry Pi Pico powered LogicAnalyzer project
The LogicAnalyzer project, developed by Agustín Gimenez Bernad, transforms the Raspberry Pi Pico into a cost-effective, high-performance logic analyzer. This tool offers up to 24 digital channels with sampling rates…
Using a Raspberry Pi Pico to perform voltage glitching attacks on microcontrollers
Matthias Kesenheimer’s PicoGlitcher is an innovative, cost-effective device designed to perform voltage glitching attacks on microcontrollers using a Raspberry Pi Pico. Voltage glitching involves introducing brief, intentional disruptions to a…
A look at the Pimoroni Pico Plus 2 board
This is a board for Pimoroni that features the RP2350 Pimoroni Pico Plus 2 W is powered and programmable via USB-C and comes with an upgraded 8MB RAM, 16MB of…
An Audio Expansion Board for your Raspberry Pi Pico
In this article we look at a speaker expansion board for your Raspberry Pi Pico. This board has an on board speaker and also a headphone jack. This is a…
A Raspberry Pi Pico GPIO Test Board
In this article we look at an expansion board for the Raspberry Pi Pico that I found on one of my searches online which is designed to test all of…
A Micropython PIR example for the Raspberry Pi Pico
In this example we connect a PIR module up to our Raspberry PI Pico, this is quite a simple module to connect as it requires only 3v3, Gnd and the…